Bmw Car Coding orders are fulfilled within 10-30 minutes of purchasing during normal business hours. For Weekends can take a little more time to fulfill your order.

Bmw Car Coding Products/Services has NO effect on Warranty in any way.

No , none of Bmw Car Coding Products/Services will effect Tunes in any way.

You can purchase BMW ENET Cable on Amazon or eBay or Aliexpress.

No, only Bmw Car Coding sends a digital code for your vehicle. After you need to download Maps and store files into USB stick.

After you order CarPlay activation , Bmw Car Coding will generate code for your vehicle, also you will need ENET cable and laptop with internet connection. Furthermore instructions will be sent to your email.

CarPlay can be activated for these models:

FULL SCREEN: NBTEVO_M, N, O, P, Q, R, S, T, U, V, W, X, Y

SPLIT SCREEN: NBTEVO_ H, L, J, K, L

HOW DO I UPDATE MY NAVIGATION IN MY BMW 2023/2024?

After checking compatibility and the current map version, you can follow these steps to update your BMW navigation maps.

DOWNLOAD THE LATEST MAP UPDATE.

A Map download link will be sent to your email address. You could download using uTorrent or mega program.

FORMAT A USB DRIVE AS FAT32/exFAT

The map update files must be copied to a recommended 64GB USB drive to be installed on your BMW. The USB drive must be formatted as FAT32/exFAT for the map update files to be recognized by your BMW's navigation system.

You can format your USB drive using the Disk Management tool in Windows or the Disk Utility tool in macOS.

COPY THE MAP UPDATE FILES TO THE USB DRIVE.

Once your USB drive is formatted, you can copy the map update files to the drive. The files will be in a .zip file, so you must unzip them first.

You can use a file archiver program, such as WinZip or 7-Zip, to unzip the files. Do not copy whole folder etc. Road Map Evo 2023 folder. Must be separated folders inside your USB.

INSERT THE USB DRIVE INTO YOUR VEHICLE.

Once the map update files are copied to the USB drive, you can insert the drive into your BMW's USB port.

The navigation system will automatically detect the map update files and start the installation process.

WAIT FOR THE UPDATE TO COMPLETE.

The update process will take a few minutes to complete and Navigation update will begin. During the update process, you cannot use the navigation system.

Once the update is complete, the navigation system will restart.

HOW LONG DOES IT TAKE TO UPDATE BMW MAPS?

The amount of time it takes to update BMW maps depends on a few factors, including the size of the update, the speed of your USB drive, and the speed of your BMW's navigation system. However, in general, it typically takes between 30 and 90 minutes to update BMW maps.

Here is a breakdown of the factors that can affect the update time:

1. Size of the update: The larger the update, the longer it will take to install.
2. Speed of your USB drive:A faster USB drive will install the update more quickly.
3. Speed of your BMW's navigation system:A faster navigation system will install the update more quickly.

If you are updating your BMW maps for the first time, allowing more time for the update to complete is important. This is because the navigation system will need to create a new index of the map data, which can take some time.

Once the update is complete, your BMW's navigation system will restart. You can then start using the new maps.

1) 
Download WDS_Installer.exe Application to Desktop:

 WDS_Installer_1.0.14.8_32-BIT.exe

https://drive.google.com/file/d/1qHjfUNX4upuTDMofP-lgdKLre9eYTLQF/view?usp=share_link

* 
NOTE - Make sure laptop connections has strong WiFi Connection
to Internet. 

* 
NOTE - Disable Windows Firewall / Defender or any 3rd Party
versions.   

2) 
Make ENET Cable connection from Laptop Ethernet Port to car OBD Port.

3) 
Start car motor and wait 2 minutes.

4) 
Run the WDS_Installer.exe Application on Desktop.

5)  Enter the following Installation Code into
the WDS_Installer Application's Popup Window:

XXXXX-XXXXX

6) 
Application should show "Feature code is valid, click to Continue"
message below the entered Code.

7) 
Select "Continue".

8) 
Select "Find Vehicle" - Execution Log should show "Found
Vehicle"

9) 
Select "Identify" - Popup Window should show "Confirm Connection
to xxxxxxxxxxxxxxxxx?"

10) 
Select "OK" - Selected Vehicle on left will display Vehicle VIN and
NBT2 VIN & Serial # Data along with the "Current SVT" and
Execution Log to the right should show Connection to Vehicle and Remote Cloud
Service and "Found NBT2 @ 169.254.199.99" along with Vehicle VIN and
NBT2 VIN & Serial # data.

11)
Select "Start" - Install will commence, taking approximately 10
minutes - Execution Log will gradually display the following as it
runs:  

Running
phase 1 of 3

Phase
1 complete

Running
phase 2 of 3

Phase
2 complete

Running
phase 3 of 3

Phase
3 complete

Final
Step - recoding NBT2...

Re-coding
NBT2 complete

Reading
Final SVT - please wait

Finished

Process
complete: Success

* 
NOTE - Watch Installer Screen during the entire install process and
take note of any Error messages should they occur.

* 
NOTE - After installation is completed, remove/delete your phones profile from
your car and then then make a new connection.  Upon re-connecting your
phone CarPlay option will now be available. 

* 
To Restore OEM Condition, which should be done before dealer Service that
involves Vehicle Programming, repeat above process, but After Selecting
"Identify" and Confirming Connection, a Popup Window will show
"Restore NBT2 to OEM from backup", select "Ok" to proceed.

After
install new Map if desired.

For
CarPlay: 

Let
car sleep 30 minutes, then:



01) Delete Car device from Phone

02) Delete Phone Device from Car

03) Place Phone physically close to Head Unit / Dashboard

04) Turn on iPhone Siri and WiFi.  To do this, select ‘Settings’ >
‘General’ > ‘Siri’ and ‘Settings’ > ‘WiFi’ on your iPhone.

05) Now you have the option to connect your vehicle via Bluetooth with your
iPhone.  To do this select ‘Bluetooth’ in your iPhone settings.

06) Then call up menu item ‘Media’ on the BMW control display and select
‘Manage mobile devices’.

07) Select ‘Connect new device’.

08) Select the option ‘Apple CarPlay’.

09) Now a data transfer request is displayed on the control display of your
BMW, consent to this with ‘Confirm’.

10) Now the pairing process appears on the control display of your BMW which
you confirm on your display and iPhone with ‘OK’.

11) After successfully connecting, the Apple CarPlay menu appears on your BMW
control display.

12) Now you have easy access to selected contents of your iPhone such as
navigation, music and news.

13) To do this, select the menu item you want.